South Bend Double Disc 750HP SFI Clutch 2005-2010 Dodge 5.9L & 6.7L Cummins

Dyna Max high performance clutch kits featuring Cryogenic processing (read below for info on this superior process). Another process that makes the South Bend Clutch far superior to stock and the competition is their use of Kevlar in their clutches. Kevlar lasts three to five times longer than standard clutch material. This clutch has a smooth engagement and it operates at a lower temperature than your stock clutch. Trust the most widely used clutch in the diesel performance industry to satisfy your extreme pulling needs. Application: 2005-2010 Dodge 5.9L and 6.7L, 6 speed w/G56 trans, up to 750 hp and 1300 ft. lbs. of torque. THIS IS AN SFI APPROVED CLUTCH. LEVER TYPE PRESSURE PLATE WITH A LIGHT INCREASE IN PEDAL EFFORT. 12 CERAMIC BUTTONS PER SIDE OF DISC. All the clutch components in this assembly are made of steel. The center plate is lugged to fit the flywheel. This complete clutch has no special requirements for install. It is a direct replacement for the OEM clutch thus it fits just like the stock one but works tons better. FREE SHIPPING WITHIN THE CONTINENTAL UNITED STATES. BRAND NEW PARTS IN THE FACTORY SEALED BOX. ***PLEASE NOTE!!!***: REQUIRES HYDRAULIC UPGRADE ASSEMBLY, (HYD-X-.750) THAT IS INCLUDED IN THE PRICE! Clutch assembly and hydraulic upgrade kit will be shipped together. This Dyna Max Kit features a full feramic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure in high horsepower and heavy hauling applications. As in all double disk applications regardless of the manufacturer these discs will make a slight noise at idle and under certain low rpm situations which is completely normal, this will not affect the life or performance of the clutch kit.This clutch is best suited for high performance purposes and extreme sled pulling. This kit is rated for up to 750 horsepower and 1300 ft. lbs. of torque.